M0008 DFT Interposer Flex
Specification
Specicifcation | Value |
---|
Length | 75 mm end-to-end |
VOXL-side Connector | J1, AXT436124 |
Mating Connector | J2, 503772-2420 |
Pin Out VOXL-side
Pin | Net | Notes/Usage |
---|
1 | DGND | |
2 | DGND | |
3 | NC | No Connect |
4 | NC | No Connect |
5 | CCI_I2C_SDA0 | CCI I2C Bus, SDA |
6 | VREG_S4A_1P8 | 1.8V VDDIO |
7 | CCI_I2C_SCL0 | CCI I2C Bus, SCL |
8 | NC | No Connect |
9 | CAM_RST0_N | Sensor Reset Control |
10 | CAM_MCLK_BUFF | MCLK, Buffered from Voxl, 1.8V |
11 | DGND | |
12 | DGND | |
13 | MIPI_CSI_CLK_CONN_P | MIPI CSI High Speed Diff Pair, CLK_P |
14 | CAM_FLASH | Sensor Sideband Control, Unused |
15 | MIPI_CSI_CLK_CONN_M | MIPI CSI High Speed Diff Pair, CLK_M |
16 | NC | No Connect |
17 | MIPI_CSI_LANE0_CONN_P | MIPI CSI High Speed Diff Pair, Data Lane 0_P |
18 | NC | No Connect |
19 | MIPI_CSI_LANE0_CONN_M | MIPI CSI High Speed Diff Pair, Data Lane 0_M |
20 | VREG_L23A_2P8 | Sensor 2.8V AVDD |
21 | DGND | |
22 | DGND | |
23 | NC | No Connect |
24 | NC | No Connect |
25 | NC | No Connect |
26 | CAM_SYNC_1 | Sensor Sync Signal, Normally Unused |
27 | NC | No Connect |
28 | NC | No Connect |
29 | NC | No Connect |
30 | NC | No Connect |
31 | DGND | |
32 | DGND | |
33 | NC | No Connect |
34 | NC | No Connect |
35 | NC | No Connect |
36 | DGND | |
Pin Out Mating-side
Pin | Net | Notes/Usage |
---|
1 | DGND | Note Pin 1 of M0008 is Pin 24 of Sensor Module |
2 | DGND | Note Pin 2 of M0008 is Pin 1 of Sensor Module |
3 | VREG_L23A_2P8 | Sensor 2.8V AVDD |
4 | CAM_MCLK_BUFF | MCLK, Buffered from Voxl, 1.8V |
5 | DGND | |
6 | DGND | |
7 | NC | No Connect |
8 | CAM_RST_N | Sensor Reset Control |
9 | VREG_S4A_1P8 | 1.8V VDDIO |
10 | CAM_FLASH | Sensor Sideband Control, Unused |
11 | DGND | |
12 | DGND | |
13 | CCI_I2C_SCL0 | CCI I2C Bus, SCL |
14 | MIPI_CSI_LANE0_CONN_P | MIPI CSI High Speed Diff Pair, Data Lane 0_P |
15 | CCI_I2C_SDA0 | CCI I2C Bus, SDA |
16 | MIPI_CSI_LANE0_CONN_M | MIPI CSI High Speed Diff Pair, Data Lane 0_M |
17 | DGND | |
18 | DGND | |
19 | NC | No Connect |
20 | MIPI_CSI_CLK_CONN_P | MIPI CSI High Speed Diff Pair, CLK_P |
21 | CAM_SYNC_EN | Sensor Sync Signal, Normally Unused |
22 | MIPI_CSI_CLK_CONN_M | MIPI CSI High Speed Diff Pair, CLK_M |
23 | ULPM | Sensor Ultra-Low-Power Mode Input, Held HIGH |
24 | DGND | |
Technical Drawings
2D Diagram